From: owner-ammf-digest@smoe.org (alt.music.moxy-fruvous digest) To: ammf-digest@smoe.org Subject: alt.music.moxy-fruvous digest V14 #5058 Reply-To: ammf@fruvous.com Sender: owner-ammf-digest@smoe.org Errors-To: owner-ammf-digest@smoe.org Precedence: bulk alt.music.moxy-fruvous digest Wednesday, September 30 2020 Volume 14 : Number 5058 Today's Subjects: ----------------- Manifest Your Much Deserved Money Overnight ["Mind Hack" Subject: Manifest Your Much Deserved Money Overnight Manifest Your Much Deserved Money Overnight http://scratchedd.buzz/-azWIE-T-3LQuLPMGri1YcaghtMDxGCrLtrbIL_6eH7VwXV2 http://scratchedd.buzz/GvH9EYy7gEzqde-va5mO7vTZm3nsBQP8l3rXU7J-1LLlAkw A piece of film consists of a light-sensitive emulsion applied to a tough, transparent base, sometimes attached to anti-halation backing or "rem-jet" layer (now only on camera films). Originally the highly flammable cellulose nitrate was used. In the 1930s, film manufacturers introduced "safety film" with a cellulose triacetate plastic base. All amateur film stocks were safety film, but the use of nitrate persisted for professional releases. Kodak discontinued the manufacture of nitrate base in 1951, and the industry transitioned entirely to safety film in 1951 in the United States and by 1955 internationally. Since the late 1990s, almost all release prints have used polyester film stock. Emulsion The emulsion consists of silver halide grains suspended in a gelatin colloid; in the case of color film, there are three layers of silver halide, which are mixed with color couplers and interlayers that filter specific light spectra. These end up creating yellow, cyan, and magenta layers in the negative after development. Chemistry Development chemicals applied to an appropriate film can produce either a positive (showing the same densities and colors as the subject) or negative image (with dark highlights, light shadows, and, in principle, complementary colors). The first films were darkened by light: negative films. Later films that produce a positive image became known as reversal films; processed transparent film of this type can be projected onto a screen. Negative images need to be transferred onto photographic paper or other substrate which reverses the image again, producing a final positive image. Creating a positive image from a negative film can also be done by scanning the negative to create a computer file which can then be reversed by software. ------------------------------ End of alt.music.moxy-fruvous digest V14 #5058 **********************************************