From: owner-ammf-digest@smoe.org (alt.music.moxy-fruvous digest) To: ammf-digest@smoe.org Subject: alt.music.moxy-fruvous digest V14 #4656 Reply-To: ammf@fruvous.com Sender: owner-ammf-digest@smoe.org Errors-To: owner-ammf-digest@smoe.org Precedence: bulk alt.music.moxy-fruvous digest Monday, July 27 2020 Volume 14 : Number 4656 Today's Subjects: ----------------- Small and light with UV sterilizer ["Mini Air Cooler" ] Open. Quote. Switch. ["Liberty Mutual Insurance" Subject: Small and light with UV sterilizer Small and light with UV sterilizer http://cooller.buzz/-MYRTgSxvc6_ZZ02NjloLMbQLYqRmWyPZ3KDqwRhMP49U0hj http://cooller.buzz/ZKc4BHZJHnJBiqJ602cb-cD7qEDcFBhwvyIG-pGSpRnvUSOf pletely destroy their host's ability to reproduce, diverting the energy that would have gone into reproduction into host and parasite growth, sometimes causing gigantism in the host. The host's other systems are left intact, allowing it to survive and sustain the parasite. Parasitic crustaceans such as those in the specialised barnacle genus Sacculina specifically cause damage to the gonads of their many species of host crabs. In the case of Sacculina, the testes of over two-thirds of their crab hosts degenerate sufficiently for these male crabs to have gained female secondary sex characteristics such as broader abdomens, smaller claws and egg-grasping appendages. Various species of helminth castrate their hosts (such as insects and snails). This may be directly, whether mechanically by feeding on their gonads, or by secreting a chemical that destroys reproductive cells; or indirectly, whether by secreting a hormone or by diverting nutrients. For example, the trematode Zoogonus lasius, whose sporocysts lack mouths, castrates the intertidal marine snail Tritia obsoleta chemically, developing in its gonad and killing its reproductive cells. Human head lice are directly transmitted obligate ectoparasites. Directly transmitted Directly transmitted parasites, not requiring a vector to reach their hosts, include parasites of terrestrial vertebrates such as lice and mites; marine parasites such as copepods and cyamid amphipods; monogeneans; and many species of nematodes, fungi, protozoans, bacteria, and viruses. Whether endoparasites or ectoparasites, each has a single host species. Within that species, most individuals are free or almost free of parasites, while a minority carry a large number of parasites; this highly uneven distribution is described as aggregated. Trophically transmitted Clonorchis sinensis, the Chinese liver fluke, is trophically transmitted. Trophically transmitted parasites are transmitted by being eaten by a host. They include trematodes (all except schistosomes), cestodes, acanthocephalans, pentastomids, many round worms, and many protozoa such as Toxoplasma. They have complex life cycles involving hosts of two or more species. In their juvenile stages, they infect and often encyst in the intermediate host. When this animal is eaten by a predator, the definitive host, the parasite survives the digestion process and matures into an adult; some live as intestinal parasites. Many trophically transmitted parasites modify the behaviour of their inter ------------------------------ Date: Sat, 25 Jul 2020 05:19:12 -0400 From: "Cryptocurrencies" Subject: Did you ever want to deal with the subject of cryptos? Did you ever want to deal with the subject of cryptos? http://aircool.today/rwQQYZ3SoS3TLlnDQm80uA0pYxHMhOVUepZTk41Sa3higk3S http://aircool.today/yyyfnbJAVHdB8fNlyPIA7lfA4p52E0vW3JryQYiKQd1RL13p Modern helicopters have introduced modular systems which allow the same airframe to be configured for different roles, for example the EH-101 in Royal Navy service can be rapidly configured for ASW or transport missions in hours. To at the same time retain flexibility and limit costs, it is possible to fit an airframe for but not with a system, for example in the US Army's AH-64D variants are all fitted to be able to take the Longbow radar system, but not enough sets have been bought to equip the whole force. The systems can be fitted to only those airframes that need it, or when finances allow the purchase of enough units. Equipment Most military helicopters are armoured to some extent however all equipment is limited to the installed power and lift capability and the limits installed equipment places on useful payload. The most extensive armour is placed around the pilots, engines, transmission and fuel tanks. Fuel lines, control cables and power to the tail rotor may also be shrouded by Kevlar armour. The most heavily armoured helicopters are attack, assault and special forces helicopters. In transport helicopters the crew compartment may or may not be fully armoured, a compromise being to give the passengers Kevlar lined seats but to leave the compartment for the most part unarmoured. Survivability is enhanced by redundancy and the placement of components to protect each other. For example, the Blackhawk family of helicopters uses two engines and can continue to fly on only one (under certain conditions), the engines are separated by the transmission and placed so that if attacked from any one flank, the engine on that flank acts to protect the transmission and the engine on the other side from damage. Aviation electronics, or avionics, such as communication radios and navigation aids are common on most military helicopters. Specialized avionics, such as electronic countermeasures and identification friend or foe systems, are military specific systems that can also be installed on military helicopters. Other payload or mission systems are installed either permanently or temporarily, based on specific mission requirements; optical and IR cameras for scout helicopters, dunking sonar and search radar for anti-submarine helicopters, extra radio transceivers and computers for helicopters used as airborne command posts. Armour, fire suppression, dynamic and electronics systems enhancements are invisible to casual inspection; as a cost-cutting measure some nations and services have been tempted to use what are essentially commercial helicopters for military purposes. For example, it has been reported that the PRC is carrying out a rapid enlargement of its assault helicopter regiments with the civilian version of the Mil Mi-17. These helicopters without armour and electronic counter measures will function well enough for training exercises and photo opportunities but would be suicidal to deploy in the assault role in actual combat situations. The intention of China appears to be to retrofit these helicopters with locally produced electronics and armour when possible, freeing available funds to allow rapid creation of enough regiments to equip each of its Group Armies, allowing a widespread buildup of experience in helicopter operations. ------------------------------ Date: Fri, 24 Jul 2020 07:42:03 -0400 From: "Casino Destroyer" Subject: Your Gift for Today =) Your Gift for Today =) http://kidneyhealth.us/0XZeaK6XZ72vBGeWhD7D6TEdKhb8KQ3vmFf0yKiQ83Qi72gZ http://kidneyhealth.us/554YpZ3X6VJL4-iIE7_OnoQMw4uhgtY9vEG38Hl6RmS-rCz7 For example, in a radio broadcasting station the station's large power amplifier is the transmitter; and the broadcasting antenna is the interface between the power amplifier and the "free space channel". The free space channel is the transmission medium; and the receiver's antenna is the interface between the free space channel and the receiver. Next, the radio receiver is the destination of the radio signal, and this is where it is converted from electricity to sound for people to listen to. Sometimes, telecommunication systems are "duplex" (two-way systems) with a single box of electronics working as both the transmitter and a receiver, or a transceiver. For example, a cellular telephone is a transceiver. The transmission electronics and the receiver electronics within a transceiver are actually quite independent of each other. This can be readily explained by the fact that radio transmitters contain power amplifiers that operate with electrical powers measured in watts or kilowatts, but radio receivers deal with radio powers that are measured in the microwatts or nanowatts. Hence, transceivers have to be carefully designed and built to isolate their high-power circuitry and their low-power circuitry from each other, as to not cause interference. Telecommunication over fixed lines is called point-to-point communication because it is between one transmitter and one receiver. Telecommunication through radio broadcasts is called broadcast communication because it is between one powerful transmitter and numerous low-power but sensitive radio receivers. Telecommunications in which multiple transmitters and multiple receivers have been designed to cooperate and to share the same physical channel are called multiplex systems. The sharing of physical channels using multiplexing often gives very large reductions in costs. Multiplexed systems are laid out in telecommunication networks, and the multiplexed signals are switched at nodes through to the correct destination terminal receiver. Analog versus digital communications Communications signals can be sent either by analog signals or digital signals. There are analog communication systems and digital communication systems. For an analog signal, the signal is varied continuously with respect to the information. In a digital signal, the information is encoded as a set of discrete values (for example, a set of ones and zeros). During the propagation and reception, the information contained in analog signals will inevitably be degraded by undesirable physical noise. (The output of a transmitter is noise-free for all practical purposes.) Commonly, the noise in a communication system can be expressed as adding or subtracting from the desirable signal in a completely random way. This form of noise is called additive noise, with the understanding that the noise can be negative or positive at different instants of time. Noise that is not additive noise is a much more difficult situation to describe or analyze, and these other kinds of noise will be omitted here. On the other hand, unless the additive noise disturbance exceeds a certain threshold, the information contained in digital signals will remain intact. Their resistance to noise represents a key advantage of digital ------------------------------ Date: Fri, 24 Jul 2020 05:36:11 -0400 From: "Liberty Mutual Insurance" Subject: Open. Quote. Switch. Open. Quote. Switch. http://woodmoski.today/ORewlRR-NZV-WlH3W8LMOnqqb4lQh7MKKW_H2CpDf3D6F2fb http://woodmoski.today/9fKOCGuqYiCaJ29yhDW6EoS8zJIP2CKpdjOwpPs_CFGb8bQ In North American television, a series is a connected set of television program episodes that run under the same title, possibly spanning many seasons. Since the late 1960s, this broadcast programming schedule typically includes between 20 and 26 episodes. Before then, a regular television season could average at least 30 episodes, and some TV series may have had as many as 39 episodes in a season. Until the 1980s, most (but certainly not all) new programs for the American broadcast networks debuted in the "fall season", which ran from September through March and nominally contained from 24 to 26 episodes. These episodes were rebroadcast during the spring (or summer) season, from April through August. Because of cable television and the Nielsen sweeps, the "fall" season now normally extends to May. Thus, a "full season" on a broadcast network now usually runs from September through May for at least 22 episodes. A full season is sometimes split into two separate units with a hiatus around the end of the calendar year, such as the first season of Jericho on CBS. When this split occurs, the last half of the episodes sometimes are referred to with the letter B as in "The last nine episodes (of The Sopranos) will be part of what is being called either "Season 6, Part 2" or "Season 6B", or in "Futurama is splitting its seasons similar to how South Park does, doing half a season at a time, so this is season 6B for them." Since the 1990s, these shorter seasons also have been referred to as ".5" or half seasons, where the run of shows between September and December is labeled "Season X", and the second run between January and May labeled "Season X.5". Examples of this include the 2004 incarnation of Battlestar Galactica, ABC's FlashForward, and ABC Family's Make It or Break It. Since at least the 2000s, new broadcast television series are often ordered (funded) for just the first 10 to 13 episodes, to gauge audience interest. If a series is popular, the network places a "back nine order" and the season is completed to the regular 20 to 26 episodes. An established series which is already popular, however, will typically receive an immediate full-season order at the outset of the season. A midseason replacement is a less-expensive short-run show of generally 10 to 13 episodes designed to take the place of an original series that failed to garner an audience and has not been picked up. A "series finale" is the last show of the series before the show is no longer produced. (In the UK, it means the end of a season, what is known in the United States as a "season finale"). A standard television season in the United States runs predominantly across the fall and winter, from late September to May. During the summer months of June through roughly mid-September, network schedules typically feature reruns of their flagship programs, first-run series with lower ratings expectations, and other specials. First-run scripted series are typically shorter and of a lower profile than those aired during the main season and can also include limited series events. Reality and game shows have also been a fixture of the schedule. In Canada, the commercial networks air most US programming in tandem with the US television season, but their original Canadian shows follow a model closer to British than American television production. Due to the smaller production budgets available in Canada, a Canadian show's season normally runs to a maximum of 13 episodes rather than 20 or more, although an exceptionally popular series such as Corner Gas or Murdoch Mysteries might receive 20-episode orders in later seasons. Canadian shows do not normally receive "back nine" extensions within the same season, however; even a popular series simply ends for the year when the original production order has finished airing, and an expanded order of more than 13 episodes is applied to the next season's renewal order rather than an extension of the current season. Only the public CBC Television normally schedules Canadian-produced programming throughout the year; the commercial networks typically now avoid scheduling Canadian productions to air in the fall, as such shows commonly get lost amid the publicity onslaught of the US fall season. Instead, Canadian-produced shows on the commercial networks typically air either in the winter as mid-season ------------------------------ End of alt.music.moxy-fruvous digest V14 #4656 **********************************************