From: owner-ammf-digest@smoe.org (alt.music.moxy-fruvous digest) To: ammf-digest@smoe.org Subject: alt.music.moxy-fruvous digest V14 #4534 Reply-To: ammf@fruvous.com Sender: owner-ammf-digest@smoe.org Errors-To: owner-ammf-digest@smoe.org Precedence: bulk alt.music.moxy-fruvous digest Friday, July 10 2020 Volume 14 : Number 4534 Today's Subjects: ----------------- Yeast Infection No More! Cure yeast infection, end your candida related symptoms ["Yeast Infection No More" Subject: Yeast Infection No More! Cure yeast infection, end your candida related symptoms Yeast Infection No More! Cure yeast infection, end your candida related symptoms http://yeastinfection.us/ofD1Qd3A18Kmr3fJzyPDYB7ZwOL36l-HJXM5uxskwjaKleZx http://yeastinfection.us/uXsIaByL0aypU9NMQ0nUfUczO0W6rJweoVzz-HZoXmBWqekQ Tableware are the dishes or dishware used for setting a table, serving food and dining. It includes cutlery, glassware, serving dishes and other items for practical as well as decorative purposes. The quality, nature, variety and number of objects varies according to culture, religion, number of diners, cuisine and occasion. For example, Middle Eastern, Indian or Polynesian food culture and cuisine sometimes limits tableware to serving dishes, using bread or leaves as individual plates. Cups are not dishes. Special occasions are usually reflected in higher quality tableware. Cutlery is more usually known as silverware or flatware in the United States, where cutlery usually means knives and related cutting instruments; elsewhere cutlery includes all the forks, spoons and other silverware items. Outside the US, flatware is a term for "open-shaped" dishware items such as plates, dishes and bowls (as opposed to "closed" shapes like jugs and vases). "Dinnerware" is another term used to refer to tableware and "crockery" refers to ceramic tableware, today often porcelain or bone china. Sets of dishes are referred to as a table service, dinner service or service set. Table settings or place settings are the dishes, cutlery and glassware used for formal and informal dining. In Ireland, such items are normally referred to as delph, the word being an English language phonetic spelling of the word Delft, the town from which so much delftware came. Silver service or butler service are methods for a butler or waiter to serve a meal. Setting the table refers to arranging the tableware, including individual place settings for each diner at the table as well as decorating the table itself in a manner suitable for the occasion. Tableware and table decoration is typically more elaborate for special occasions. Unusual dining locations demand tableware be adapted. ------------------------------ Date: Thu, 9 Jul 2020 10:47:58 -0400 From: "Medicfeet Sandal" Subject: Don't waste any more of your time and money! Don't waste any more of your time and money! http://medicsandal.us/MyoNMaQ1gc01eNAea4rKJ-Aq7ivAwcPt-A_oVK6MR-IdEw http://medicsandal.us/vBKdyXWH-tjngpgrVm3SQmTLwBp6OCVCLgLldH8mZLPjyA Japanese ceramic tableware is an industry that is many centuries old. Unlike in Western cultures, where tableware is often produced and bought in matching sets, Japanese tableware is set on the table so that each dish complements the type of food served in it. Since Japanese meals normally include several small amounts of each food per person, this means that each person has a place setting with several different small dishes and bowls for holding individual food and condiments. The emphasis in a Japanese table setting is on enhancing the appearance of the food, which is partially achieved by showing contrasts between the items. Each bowl and dish may have a different shape, colour or pattern. Place setting A basic complete place setting for one person in Japan would include the following: Hot noodle bowl Rice bowl Soup bowl Two to three shallow 3- to 5-inch diameter dishes Two to three 3- to 5-inch diameter, 1- to 3-inch-deep bowls Two square or rectangular pieces, traditionally served for serving fish Three 2- to 3-inch diameter condiment plates Cold noodle tray with bamboo strainer Dipping sauce cup Chopsticks and chopstick rest Not all of these plates and bowls would be necessary for one meal. A rice bowl, a soup bowl, two or three small dishes with accompanying foods, and two or three condiment dishes for person would be typical. Various serving bowls and platters would also be set on a table for a typical meal, along with a soy sauce cruet, a small pitcher for tempura or other sauce, and a tea setting of tea pot, tea cups and tea cup saucers. ------------------------------ Date: Thu, 9 Jul 2020 05:00:34 -0400 From: "Trump Supporter Flag" Subject: Get a FREE Trump 2020 Flag [Today Only!] Get a FREE Trump 2020 Flag [Today Only!] http://easybeach.bid/nlYXRXsMKYNjehgbbDQgZpjhBrIvtV4-U1pBTJsc9nMrJse3 http://easybeach.bid/3NJOg0jAt8KNYhSeZTZerli8FJBgW3uk-YvpfWU-bjSLNRI- All plastic is subject to deterioration through physical or chemical means, and thus, motion picture film is at risk for the same reason. Films deteriorate over time, which can damage individual frames or even lead to the entire film being destroyed. Cellulose nitrate, cellulose diacetate and triacetate are known to be unstable media: improperly preserved film can deteriorate in a period of time much faster than many photographs or other visual presentations. Cellulose nitrate, because of its unstable chemistry, eventually breaks down, releasing nitric acid, further catalyzing the decomposition. In the final stages of celluloid decomposition, the film turns into a rust-like powder. Likewise, tri-acetate stock is also vulnerable to deterioration. Because of the small gauge of the film, owners of home-made films often find that their film can become shrunken and brittle to the point where the film is unwatchable in the space of a few years. In general, decaying acetate film breaks down into acetic acid, and similar to celluloid decomposition, leads to an auto-catylictic breakdown of the base that cannot be reversed. The result of the acetic acid released is a strong odor of vinegar, which is why the decay process in the archival community is known as "vinegar syndrome". Modern polyester-based stocks are far more stable by comparison and are rated to last hundreds of years if stored properly. Intermediate and print stocks 35 mm film print frames. At far left and far right, outside the perforations, is the SDDS soundtrack as an image of a digital signal. Between the perforations is the Dolby Digital soundtrack (note the tiny Dolby "Double D" logo in the center of each area between the perforations). Just inside the perforations, on the left side of the image, is the analog optical soundtrack, with two channels encoded using Dolby SR noise reduction that can be dematrixed into four channels using Dolby Pro Logic. The optical timecode used to synchronize a DTS soundtrack, which sits between the optical soundtrack and the image, is not pictured. Finally, the image here is an anamorphic image used to create a 2.39:1 aspect ratio when projected through an anamorphic lens. Note the thin frame lines of anamorphic prints. The distinction between camera stocks and print stocks involves a difference in the recording process. When the work print or edit master has been approved, the Original Camera Negative (OCN) is assembled by a negative cutter using the edited work print or EDL (edit decision list) as a guide. A series of Answer Prints are then made from the OCN. During the Answer Print stage, corrections in the film's density and color are corrected (timed) to the filmmakers' tastes. Interpositive (IP) prints are struck from the OCN, checked to make sure they look the same as the custom timed Answer Print, and then each IP is used to make one or more Dupe Negative (DN) copies. The release prints are then generated from the DN(s). Recently, with the development of digital intermediate (DI), it has become possible to completely edit, composite visual effects, and color grade the image digitally at full resolution and bit-depth. In this workflow, the answer print is generated digitally and then written out to the IP stage using a laser film printer. Due to the specialized nature of the exposure and the higher degree of control afforded by the film lab equipment, these intermediate and release stocks are specially designed solely for these applications and are generally not feasible for camera shooting. Because intermediates only function to maintain the image information accurately across duplication, each manufacturer tends to only produce one or two different intermediate stocks. Similarly, release print stocks usually are available only in two varieties: a "normal" print or a deluxe print (on more-costly print film like Kodak Vision Premiere) with slightly greater saturation and contrast. ------------------------------ Date: Thu, 9 Jul 2020 07:01:36 -0400 From: "Watt PRO Saver" Subject: Reduces your electricity bill by 50%. Guaranteed results! Reduces your electricity bill by 50%. Guaranteed results! http://wattpro.us/A6Im3YtIw0TiwfNwlvpbq3Y-M_mRKFSWkuhjQKwD6fA-qzAB http://wattpro.us/Wvar7Dj0vFoxbpPLRNggh7WQXX24cydSCzczs8NIy3Njzo7g ople of Ecuador amended their Constitution to recognize the inherent rights of nature, or Pachamama. The new text arose in large part as a result of cosmologies of the indigenous rights movement and actions to protect the Amazon, consistent with the concept of Sumac Kawsay ("buen vivir" in Spanish, "good living" in English), or encapsulating a life in harmony with nature with humans as part of the ecosystem. Among other provisions, Article 71 states that bNature or Pachamama, where life is reproduced and exists, has the right to exist, persist, maintain itself and regenerate its own vital cycles, structure, functions and its evolutionary processes.b The Article adds enforcement language as well, stating that bAny personb&may demand the observance of the rights of the natural environment before public bodies(...).b Echoing Christopher Stone, Article 72 adds that bNature has the right to be completely restored (...) independent of the obligation (...) to compensate people (...).b Judicial decisions Bangladesh Turag River, near Dhaka, Bangladesh In 2019, the High Court of Bangladesh ruled on a case addressing pollution of and illegal development along the Turag River, an upper tributary of the Buriganga. Among its findings, the High Court recognized the river as a living entity with legal rights, and it further held that the same would apply to all rivers in Bangladesh. The Court ordered the National River Protection Commission to serve as the guardian for the Turag and other rivers. Colombia Atrato River in Colombia. In a 2016 ruling by the Constitutional Court involving the river's pollution, the court stated that the river is a subject of rights, and that humans are bonly one more event within a long evolutionary chain in no way (...) owner of other species, biodiversity or natural resources, or the fate of the planet.b Colombia has not adopted statutes or constitutional provisions addressing nature's rights (as of 2019). However, this has not prevented Colombian courts from finding nature's rights as inherent. In a 2016 case, the Colombia Constitutional Court ordered cleanup of the polluted Atrato River, stating that nature is a btrue subject of rights that must be recognized by states and exercised (...) for example, by the communities that inhabit it or have a special relationship with it.b The Court added that humans are bonly one more event within a long evolutionary chain in no way (...) owner of other species, biodiversity or natural resource ------------------------------ Date: Thu, 9 Jul 2020 08:53:58 -0400 From: "Retirement Savings" Subject: Terrifying Laws May Cripple Your Retirement Savings Terrifying Laws May Cripple Your Retirement Savings http://visionebook.co/9dVnX4dOcE5AL94JYjQ13dUWUCY5dqTA0h6OI94Bw0HbP2t4 http://visionebook.co/7yR_anGhpHBTkbF_XPe3uRM_4iAPvW5c2OFRsF-A4E0UXRM3 The composition of mineral sand is highly variable, depending on the local rock sources and conditions. The bright white sands found in tropical and subtropical coastal settings are eroded limestone and may contain coral and shell fragments in addition to other organic or organically derived fragmental material, suggesting that sand formation depends on living organisms, too. The gypsum sand dunes of the White Sands National Park in New Mexico are famous for their bright, white color. Arkose is a sand or sandstone with considerable feldspar content, derived from weathering and erosion of a (usually nearby) granitic rock outcrop. Some sands contain magnetite, chlorite, glauconite, or gypsum. Sands rich in magnetite are dark to black in color, as are sands derived from volcanic basalts and obsidian. Chlorite-glauconite bearing sands are typically green in color, as are sands derived from basaltic lava with a high olivine content. Many sands, especially those found extensively in Southern Europe, have iron impurities within the quartz crystals of the sand, giving a deep yellow color. Sand deposits in some areas contain garnets and other resistant minerals, including some small gemstones. Sources Rocks erode or weather over a long period of time, mainly by water and wind, and their sediments are transported downstream. These sediments continue to break apart into smaller pieces until they become fine grains of sand. The type of rock the sediment originated from and the intensity of the environment gives different compositions of sand. The most common rock to form sand is granite, where the feldspar minerals dissolve faster than the quartz, causing the rock to break apart into small pieces. In high energy environments rocks break apart much faster than in more calm settings. For example, Granite rocks this means more Feldspar minerals in the sand because it wouldn't have had time to dissolve. The term for sand formed by weathering is epiclastic. Sand from rivers are collected either from the river itself or its flood plain and accounts for the majority of the sand used in the construction industry. Because of this, many small rivers have been depleted, causing environmental concern and economic losses to adjacent land. The rate of sand mining in such areas greatly outweighs the rate the sand can replenish, making it a non-renewable resource. Sand dunes are a consequence of dry conditions or wind deposition. The Sahara Desert is very dry because of its geographic location and is known for its vast sand dunes. They exist here because very little vegetation is able to grow and there's not a lot of water. Over time, wind blows away all the fine particles, such as clay and dead organic matter, leaving only sand and larger rocks. Only 15% of the Sahara is sand dunes, while 70% is bare rock. The wind is responsible for creating these different environments and shaping the sand to be round and smooth. These properties make desert sand unusable for construction. Beach sand is also formed by erosion. Over thousands of years, rocks are eroded near the shoreline from the constant motion of waves and the sediments build up. Weathering and river deposition also accelerate the process of creating a beach, along with marine animals interacting with rocks, such as eating the algae off of them. Once there is a sufficient amount of sand, the beach acts as a barrier to keep the land from eroding any further. This sand is ideal for construction as it is angular ------------------------------ Date: Thu, 9 Jul 2020 06:28:38 -0400 From: "SunPower Advertisement" Subject: Summertime is solar time Summertime is solar time http://halkidibe.bid/O44v1iZKDShwemsOMqOQJUV7GQz5snsYjmGyVzQZjyzSykjT http://halkidibe.bid/o-qawu_XOkbSgbWaPqq1Ug0w5fwitQpOQxlZg242zI_rWvmb The standard definition of a glass (or vitreous solid) is a solid formed by rapid melt quenching. However, the term "glass" is often defined in a broader sense, to describe any non-crystalline (amorphous) solid that exhibits a glass transition when heated towards the liquid state. Glass is an amorphous solid. Although the atomic-scale structure of glass shares characteristics of the structure of a supercooled liquid, glass exhibits all the mechanical properties of a solid. As in other amorphous solids, the atomic structure of a glass lacks the long-range periodicity observed in crystalline solids. Due to chemical bonding constraints, glasses do possess a high degree of short-range order with respect to local atomic polyhedra. The notion that glass flows to an appreciable extent over extended periods of time is not supported by empirical research or theoretical analysis (see viscosity in solids). Laboratory measurements of room temperature glass flow do show a motion consistent with a material viscosity on the order of 1017b1018 Pa s. Formation from a supercooled liquid Main article: Glass transition Question, Web Fundamentals.svg Unsolved problem in physics : What is the nature of the transition between a fluid or regular solid and a glassy phase? "The deepest and most interesting unsolved problem in solid state theory is probably the theory of the nature of glass and the glass transition." bP.W. Anderson (more unsolved problems in physics ) For melt quenching, if the cooling is sufficiently rapid (relative to the characteristic crystallization time) then crystallization is prevented and instead the disordered atomic configuration of the supercooled liquid is frozen into the solid state at Tg. The tendency for a material to form a glass while quenched is called glass-forming ability. This ability can be predicted by the rigidity theory. Generally, a glass exists in a structurally metastable state with respect to its crystalline form, although in certain circumstances, for example in atactic polymers, there is no crystalline analogue of the amorphous phase. Glass is sometimes considered to be a liquid due to its lack of a first-order phase transition where certain thermodynamic variables such as volume, entropy and enthalpy are discontinuous through the glass transition range. The glass transition may be described as analogous to a second-order phase transition where the intensive thermodynamic variables such as the thermal expansivity and heat capacity are discontinuous. Nonetheless, the equilibrium theory of phase transformations does not entirely hold for glass, and hence the glass transition cannot be classed as one of the classical equilibrium phase transformations in solids ------------------------------ Date: Thu, 9 Jul 2020 04:24:38 -0400 From: "Samanta" Subject: Don't try to meet fake models, meet real feeders! Don't try to meet fake models, meet real feeders! http://necksonu.today/wEZcH0Wg52nzFIWnrOwmm-oCaYo0c0WUxt1wjIOoKcfGFY2z http://necksonu.today/Cnv7UK2lH-tGPOlclnlQXlj0wCy7cbJnmo1DnsFnqdfahyqU The use of nitrocellulose film for motion pictures led to the requirement for fireproof projection rooms with wall coverings made of asbestos. A training film for projectionists included footage of a controlled ignition of a reel of nitrate film, which continued to burn when fully submerged in water. Once burning, it is extremely difficult to extinguish. Unlike many other flammable materials, nitrocellulose does not need air to continue burning, as the material contains sufficient oxygen within its molecular structure. For this reason, immersing burning film in water may not extinguish it, and could actually increase the amount of smoke produced. Owing to public safety precautions, the London Underground forbade transport of movies on its system until well past the introduction of safety film. Cinema fires caused by ignition of nitrocellulose film stock were the cause of the 1926 Dromcolliher cinema tragedy in County Limerick in which 48 people died and the 1929 Glen Cinema disaster in Paisley, Scotland, which killed 69 children. Today, nitrate film projection is rare and normally highly regulated and requires extensive precautionary measures including extra projectionist health and safety training. Projectors certified to run nitrate films have many precautions, among them the chambering of the feed and takeup reels in thick metal covers with small slits to allow the film to run through. The projector is modified to accommodate several fire extinguishers with nozzles aimed at the film gate. The extinguishers automatically trigger if a piece of flammable fabric placed near the gate starts to burn. While this triggering would likely damage or destroy a significant portion of the projection components, it would prevent a fire which could cause far greater damage. Projection rooms may be required to have automatic metal covers for the projection windows, preventing the spread of fire to the auditorium. The Dryden Theatre at the George Eastman Museum is one of a few theaters in the world that is capable of safely projecting nitrate films, and regularly screens films to the public. Nitrocellulose was found to gradually decompose, releasing nitric acid and further catalyzing the decomposition (eventually into a flammable powder). Decades later, storage at low temperatures was discovered as a means of delaying these reactions indefinitely. The great majority of films produced during the early 20th century are thought to have been lost either through this accelerating, self-catalyzed disintegration or through studio warehouse fires. Salvaging old films is a major problem for film archivists (see film preservation). Nitrocellulose film base manufactured by Kodak can be identified by the presence of the word 'nitrate' in dark letters along one edge; the word only in clear letters on a dark background indicates derivation from a nitrate base original negative or projection print, but the film in hand itself may be a later print or copy negative, made on safety film. Acetate film manufactured during the era when nitrate films were still in use was marked 'Safety' or 'Safety Film' along one edge in dark letters. 8, 9.5, and 16 mm film stocks, intended for amateur and other nontheatrical use, were never manufactured with a nitrate base in the west, but rumors exist of 16 mm nitrate film having been produced in the former Soviet Union and/or China. Nitrate dominated the market for professional-use 35 mm motion picture film from the industry's origins to the early 1950s. While cellulose acetate-based so-called "safety film", notably cellulose diacetate and cellulose acetate propionate, was produced in the gauge for small-scale use in niche applications (such as printing advertisements and other short films to enable them to be sent through the mails without the need for fire safety precautions), the early generations of safety film base had two major disadvantages relative to nitrate: it was much more expensive to manufacture, and considerably less durable in repeated projection. The cost of the safety precautions associated with the use of nitrate was significantly lower than the cost of using any of the safety bases available before 1948. These drawbacks were ------------------------------ Date: Thu, 9 Jul 2020 10:35:45 -0400 From: "Free Woodworking Plans" Subject: Last chance? Don't miss this out... Last chance? Don't miss this out... http://uvcooler.us/_5NFtHUlCh7fmYJ2euiQ0JsSDtebhuL_4PG4VMJDyA7vz0MW http://uvcooler.us/8UUX1umICVzpNwJOiEPm0_QvUKt8-HStXdMPqaZSJL4OW06f Painting has been used since early prehistoric times, and can be very elaborate. The painting is often applied to pottery that has been fired once, and may then be overlaid with a glaze afterwards. Many pigments change colour when fired, and the painter must allow for this. Glaze Perhaps the most common form of decoration, that also serves as protection to the pottery, by being tougher and keeping liquid from penetrating the pottery. Glaze may be clear, especially over painting, or coloured and opaque. There is more detail in the section below. Carving Pottery vessels may be decorated by shallow carving of the clay body, typically with a knife or similar instrument used on the wheel. This is common in Chinese porcelain of the classic periods. Burnishing the surface of pottery wares may be burnished prior to firing by rubbing with a suitable instrument of wood, steel or stone to produce a polished finish that survives firing. It is possible to produce very highly polished wares when fine clays are used or when the polishing is carried out on wares that have been partially dried and contain little water, though wares in this condition are extremely fragile and the risk of breakage is high. Terra Sigillata is an ancient form of decorating ceramics that was first developed in Ancient Greece. Additives can be worked into the clay body prior to forming, to produce desired effects in the fired wares. Coarse additives such as sand and grog (fired clay which has been finely ground) are sometimes used to give the final product a required texture. Contrasting coloured clays and grogs are sometimes used to produce patterns in the finished wares. Colourants, usually metal oxides and carbonates, are added singly or in combination to achieve a desired colour. Combustible particles can be mixed with the body or pressed into the surface to produce texture. Lithography, also called litho, although the alternative names of transfer print or "decal" are also common. These are used to apply designs to articles. The litho comprises three layers: the colour, or image, layer which comprises the decorative design; the cover coat, a clear protective layer, which may incorporate a low-melting glass; and the backing paper on which the design is printed by screen printing or lithography. There are various methods of transferring the design while removing the backing-paper, some of which are suited to machine application. Banding is the application by hand or by machine of a band of colour to the edge of a plate or cup. Also known as "lining", this operation is often carried out on a potter's wheel. Agateware is named after its resemblance to the quartz mineral agate which has bands or layers of colour that are blended together, agatewares are made by blending clays of differing colours together but not mixing them to the extent that they lose their individual identities. The wares have a distinctive veined or mottled appearance. The term "agateware" is used to describe such wares in the United Kingdom; in Japan the term "neriage" is used and in China, where such things have been made since at least the Tang Dynasty, they are called "marbled" wares. Great care is required in the selection of clays to be used for making agatewares as the clays used must have matching thermal movement characteristics. ------------------------------ Date: Thu, 9 Jul 2020 07:26:44 -0400 From: " wireless-N mini extender" Subject: Eliminates Connectivity Problems in Dead Zones This email must be viewed in HTML mode. ------------------------------ End of alt.music.moxy-fruvous digest V14 #4534 **********************************************