From: owner-ammf-digest@smoe.org (alt.music.moxy-fruvous digest) To: ammf-digest@smoe.org Subject: alt.music.moxy-fruvous digest V14 #13643 Reply-To: ammf@fruvous.com Sender: owner-ammf-digest@smoe.org Errors-To: owner-ammf-digest@smoe.org Precedence: bulk alt.music.moxy-fruvous digest Friday, April 5 2024 Volume 14 : Number 13643 Today's Subjects: ----------------- Welcome to our Braun Series 9 Pro Rewards Team ["CVS Department" Subject: Welcome to our Braun Series 9 Pro Rewards Team Welcome to our Braun Series 9 Pro Rewards Team http://vitaafarmcode.za.com/loyq8da6tDi8DAaoXqv5GJaivkJ2AMq4RuRwUYviWibwktcSIA http://vitaafarmcode.za.com/zq48j0RGTtLVq9I-JW11VoqvU7AMDwz4aw3lzuEdyYZqPhnLdw ailways were a formalised development of industrial tramways, which had found need on occasions to add additional braking capacity by adding an empty truck to the rear of a group of tramcars. This allowed the "locomotive" b often a cableway powered by a steam engine at the surface b to operate both safely and, more importantly, at higher speed. The first railways, such as the pioneering Liverpool and Manchester Railway of 1830, used a version of the tramways buffer and chain coupling, termed a screw-coupling. Vehicles are coupled by hand using a hook and links with a turnbuckle-like device that draws the vehicles together. Vehicles have buffers, one at each corner on the ends, which are pulled together and compressed by the coupling device. With no continuous brake across the entire train, the whole train was reliant on the braking capacity of the locomotive, and train lengths were restricted. To allow for longer trains, early railway companies from the 1840s onwards began replicating industrial tramway practises, by adding "break vans". The term was derived from their name on the industrial tramways, in which they controlled the (residual) train if there was a "break" in the linkage to the locomotive.[citation needed] Early railway couplings had been found to be prone to breakages. The term was only replaced by "brake van" from the 1870s onwards. Because of the combined risks of shortage of brake power and breaking couplings, the speed of freight trains was initially restricted to 25 mph (40 km/h). The brake van was marshalled at the rear of the train, and served two purposes: Provided additional braking for 'unfitted' goods trains Put a man (the guard) at the rear of the train, who could take action in the event of a breakdown or accident While the UK railway system persisted until post-nationalisation in 1948 with "unfitted" (discontinuously braked) trains and loose couplings (the final unfitted trains ran in the 1990s), other systems, such as the North American adoption of the Janney coupler, overcame the same railway safety issues in a different manner. The guard's duties This section does not cite any sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged and removed. (January 2015) (Learn how and when to remove this template message) On unfitted trains, the brake van has several purposes, and hence jobs for the guard: Operating the brake, train supervision, and illumination & communication. Firstly, and most importantly, the guard would use the brake van's brakes to a ------------------------------ Date: Fri, 5 Apr 2024 09:10:44 +0200 From: "PHILIPS" Subject: Surprise in your inbox (for Philips Sonicare Smart Electric Toothbrush customers Only) Surprise in your inbox (for Philips Sonicare Smart Electric Toothbrush customers Only) http://pittsburghtoolsetharborfreight.best/9KpJtfYmETlWJu-Afk4UdiyybQmbpl-vC1ctbPKziW2GYr_W http://pittsburghtoolsetharborfreight.best/wgKfCfqx99B8gYa2vpLlYu0-XVzCWmR-WgrDYc5evipRZsUVtA ailways were a formalised development of industrial tramways, which had found need on occasions to add additional braking capacity by adding an empty truck to the rear of a group of tramcars. This allowed the "locomotive" b often a cableway powered by a steam engine at the surface b to operate both safely and, more importantly, at higher speed. The first railways, such as the pioneering Liverpool and Manchester Railway of 1830, used a version of the tramways buffer and chain coupling, termed a screw-coupling. Vehicles are coupled by hand using a hook and links with a turnbuckle-like device that draws the vehicles together. Vehicles have buffers, one at each corner on the ends, which are pulled together and compressed by the coupling device. With no continuous brake across the entire train, the whole train was reliant on the braking capacity of the locomotive, and train lengths were restricted. To allow for longer trains, early railway companies from the 1840s onwards began replicating industrial tramway practises, by adding "break vans". The term was derived from their name on the industrial tramways, in which they controlled the (residual) train if there was a "break" in the linkage to the locomotive.[citation needed] Early railway couplings had been found to be prone to breakages. The term was only replaced by "brake van" from the 1870s onwards. Because of the combined risks of shortage of brake power and breaking couplings, the speed of freight trains was initially restricted to 25 mph (40 km/h). The brake van was marshalled at the rear of the train, and served two purposes: Provided additional braking for 'unfitted' goods trains Put a man (the guard) at the rear of the train, who could take action in the event of a breakdown or accident While the UK railway system persisted until post-nationalisation in 1948 with "unfitted" (discontinuously braked) trains and loose couplings (the final unfitted trains ran in the 1990s), other systems, such as the North American adoption of the Janney coupler, overcame the same railway safety issues in a different manner. The guard's duties This section does not cite any sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged and removed. (January 2015) (Learn how and when to remove this template message) On unfitted trains, the brake van has several purposes, and hence jobs for the guard: Operating the brake, train supervision, and illumination & communication. Firstly, and most importantly, the guard would use the brake van's brakes to a ------------------------------ Date: Fri, 5 Apr 2024 09:05:18 +0200 From: "Home Depot Shopper Gift Opportunity" Subject: $50 Home Depot Reward. Participation Required $50 Home Depot Reward. Participation Required http://vitaafarmcode.za.com/ZcLgfP_Cwnc8opRRKunexgeAdo9UTgV7-BJQjgMLodT9S7ugQg http://vitaafarmcode.za.com/EaetvZbQcp2SDiVORqk8nehZ5KRMcPh14xj_VbPQepx5Ar_qXQ d development of industrial tramways, which had found need on occasions to add additional braking capacity by adding an empty truck to the rear of a group of tramcars. This allowed the "locomotive" b often a cableway powered by a steam engine at the surface b to operate both safely and, more importantly, at higher speed. The first railways, such as the pioneering Liverpool and Manchester Railway of 1830, used a version of the tramways buffer and chain coupling, termed a screw-coupling. Vehicles are coupled by hand using a hook and links with a turnbuckle-like device that draws the vehicles together. Vehicles have buffers, one at each corner on the ends, which are pulled together and compressed by the coupling device. With no continuous brake across the entire train, the whole train was reliant on the braking capacity of the locomotive, and train lengths were restricted. To allow for longer trains, early railway companies from the 1840s onwards began replicating industrial tramway practises, by adding "break vans". The term was derived from their name on the industrial tramways, in which they controlled the (residual) train if there was a "break" in the linkage to the locomotive.[citation needed] Early railway couplings had been found to be prone to breakages. The term was only replaced by "brake van" from the 1870s onwards. Because of the combined risks of shortage of brake power and breaking couplings, the speed of freight trains was initially restricted to 25 mph (40 km/h). The brake van was marshalled at the rear of the train, and served two purposes: Provided additional braking for 'unfitted' goods trains Put a man (the guard) at the rear of the train, who could take action in the event of a breakdown or accident While the UK railway system persisted until post-nationalisation in 1948 with "unfitted" (discontinuously braked) trains and loose couplings (the final unfitted trains ran in the 1990s), other systems, such as the North American adoption of the Janney coupler, overcame the same railway safety issues in a different manner. The guard's duties This section does not cite any sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged and removed. (January 2015) (Learn how and when to remove this template message) On unfitted trains, the brake van has several purposes, an ------------------------------ Date: Fri, 5 Apr 2024 10:12:43 +0200 From: "Flat Belly" Subject: Eat THIS Ugly Plant = flat belly by tomorrow Eat THIS Ugly Plant = flat belly by tomorrow http://visionpremium.best/TH29NKzMCB1L3IdR9ei5fNDFnqJ1xWmoucrh4HLtZaYnyvYQ http://visionpremium.best/ff0muByWj-IcQ0ddpdLUHFl8iuL-pMn_OR5yn4AuCNeQLn5O2w ailways were a formalised development of industrial tramways, which had found need on occasions to add additional braking capacity by adding an empty truck to the rear of a group of tramcars. This allowed the "locomotive" b often a cableway powered by a steam engine at the surface b to operate both safely and, more importantly, at higher speed. The first railways, such as the pioneering Liverpool and Manchester Railway of 1830, used a version of the tramways buffer and chain coupling, termed a screw-coupling. Vehicles are coupled by hand using a hook and links with a turnbuckle-like device that draws the vehicles together. Vehicles have buffers, one at each corner on the ends, which are pulled together and compressed by the coupling device. With no continuous brake across the entire train, the whole train was reliant on the braking capacity of the locomotive, and train lengths were restricted. To allow for longer trains, early railway companies from the 1840s onwards began replicating industrial tramway practises, by adding "break vans". The term was derived from their name on the industrial tramways, in which they controlled the (residual) train if there was a "break" in the linkage to the locomotive.[citation needed] Early railway couplings had been found to be prone to breakages. The term was only replaced by "brake van" from the 1870s onwards. Because of the combined risks of shortage of brake power and breaking couplings, the speed of freight trains was initially restricted to 25 mph (40 km/h). The brake van was marshalled at the rear of the train, and served two purposes: Provided additional braking for 'unfitted' goods trains Put a man (the guard) at the rear of the train, who could take action in the event of a breakdown or accident While the UK railway system persisted until post-nationalisation in 1948 with "unfitted" (discontinuously braked) trains and loose couplings (the final unfitted trains ran in the 1990s), other systems, such as the North American adoption of the Janney coupler, overcame the same railway safety issues in a different manner. The guard's duties This section does not cite any sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged and removed. (January 2015) (Learn how and when to remove this template message) On unfitted trains, the brake van has several purposes, and hence jobs for the guard: Operating the brake, train supervision, and illumination & communication. Firstly, and most importantly, the guard would use the brake van's brakes to a ------------------------------ Date: Fri, 5 Apr 2024 08:04:25 +0200 From: "Ace Hardware Opinion Requested" Subject: Up to $100 in Exclusive Rewards - Provide Your Opinion on Ace Hardware Up to $100 in Exclusive Rewards - Provide Your Opinion on Ace Hardware http://pittsburghtoolsetharborfreight.best/ZqKCWUQUsxUrAflq1yEDc2rgldibRxklqEdjdZi1-W5RyWHeiw http://pittsburghtoolsetharborfreight.best/D2Se80T5p_O0nnnO6At5FiT7nQ-CSjxlOCbD7tb4RrlQD33O5A d development of industrial tramways, which had found need on occasions to add additional braking capacity by adding an empty truck to the rear of a group of tramcars. This allowed the "locomotive" b often a cableway powered by a steam engine at the surface b to operate both safely and, more importantly, at higher speed. The first railways, such as the pioneering Liverpool and Manchester Railway of 1830, used a version of the tramways buffer and chain coupling, termed a screw-coupling. Vehicles are coupled by hand using a hook and links with a turnbuckle-like device that draws the vehicles together. Vehicles have buffers, one at each corner on the ends, which are pulled together and compressed by the coupling device. With no continuous brake across the entire train, the whole train was reliant on the braking capacity of the locomotive, and train lengths were restricted. To allow for longer trains, early railway companies from the 1840s onwards began replicating industrial tramway practises, by adding "break vans". The term was derived from their name on the industrial tramways, in which they controlled the (residual) train if there was a "break" in the linkage to the locomotive.[citation needed] Early railway couplings had been found to be prone to breakages. The term was only replaced by "brake van" from the 1870s onwards. Because of the combined risks of shortage of brake power and breaking couplings, the speed of freight trains was initially restricted to 25 mph (40 km/h). The brake van was marshalled at the rear of the train, and served two purposes: Provided additional braking for 'unfitted' goods trains Put a man (the guard) at the rear of the train, who could take action in the event of a breakdown or accident While the UK railway system persisted until post-nationalisation in 1948 with "unfitted" (discontinuously braked) trains and loose couplings (the final unfitted trains ran in the 1990s), other systems, such as the North American adoption of the Janney coupler, overcame the same railway safety issues in a different manner. The guard's duties This section does not cite any sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged and removed. (January 2015) (Learn how and when to remove this template message) On unfitted trains, the brake van has several purposes, an ------------------------------ Date: Wed, 3 Apr 2024 17:21:15 +0000 From: "Burial Insurance Offer" Subject: Don't wait until it's too late!! Content-Transfer-Encoding: 8bit ------------------------------ Date: Wed, 3 Apr 2024 12:08:05 +0000 From: "SeniorSavingsTips Ad" Subject: 19 Ways Seniors Can Save Content-Transfer-Encoding: 8bit ------------------------------ End of alt.music.moxy-fruvous digest V14 #13643 ***********************************************